An update for kernel is now available for openEuler-24.03-LTS-SP1 Security Advisory openeuler-security@openeuler.org openEuler security committee openEuler-SA-2026-4358 Final 1.0 1.0 2026-10-16 Initial 2026-10-16 2026-10-16 openEuler SA Tool V1.0 2026-10-16 kernel security update An update for kernel is now available for openEuler-24.03-LTS-SP1 The Linux Kernel, the operating system core itself. Security Fix(es): In the Linux kernel, the following vulnerability has been resolved: erofs: fix inline data read failure for ztailpacking pclusters Compressed folios for ztailpacking pclusters must be valid before adding these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster() may assume they are already valid and then trigger a NULL pointer dereference. It is somewhat hard to reproduce because the inline data is in the same block as the tail of the compressed indexes, which are usually read just before. However, it may still happen if a fatal signal arrives while read_mapping_folio() is running, as shown below: erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : z_erofs_decompress_queue+0x4c8/0xa14 lr : z_erofs_decompress_queue+0x160/0xa14 sp : ffffffc08b3eb3a0 x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000 x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001 x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700 x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098 x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004 x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9 x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: z_erofs_decompress_queue+0x4c8/0xa14 z_erofs_runqueue+0x908/0x97c z_erofs_read_folio+0x128/0x228 filemap_read_folio+0x68/0x128 filemap_get_pages+0x44c/0x8b4 filemap_read+0x12c/0x5b8 generic_file_read_iter+0x4c/0x15c do_iter_readv_writev+0x188/0x1e0 vfs_iter_read+0xac/0x1a4 backing_file_read_iter+0x170/0x34c ovl_read_iter+0xf0/0x140 vfs_read+0x28c/0x344 ksys_read+0x80/0xf0 __arm64_sys_read+0x24/0x34 invoke_syscall+0x60/0x114 el0_svc_common+0x88/0xe4 do_el0_svc+0x24/0x30 el0_svc+0x40/0xa8 el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1bc/0x1c0 Fix this by reading the inline data before allocating and adding the pclusters to the I/O chains.(CVE-2026-45943) In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_acpi_enumerate_xcc() In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM, the function returns directly without releasing the allocated xcc_info, resulting in a memory leak. Fix this by ensuring that xcc_info is properly freed in the error paths. Compile tested only. Issue found using a prototype static analysis tool and code review.(CVE-2026-45947) In the Linux kernel, the following vulnerability has been resolved: hwrng: core - use RCU and work_struct to fix race condition Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex lock, a concurrent hwrng_unregister() may call kthread_stop() again on the same task. Additionally, if hwrng_unregister() is called immediately after hwrng_register(), the stopped thread may have never been executed. Thus, hwrng_fill remains dirty even after hwrng_unregister() returns. In this case, subsequent calls to hwrng_register() will fail to start new threads, and hwrng_unregister() will call kthread_stop() on the same freed task. In both cases, a use-after-free occurs: refcount_t: addition on 0; use-after-free. WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0 Call Trace: kthread_stop+0x181/0x360 hwrng_unregister+0x288/0x380 virtrng_remove+0xe3/0x200 This patch fixes the race by protecting the global hwrng_fill pointer inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only once, and calls to kthread_run() and kthread_stop() are serialized with the lock held. To avoid deadlock in hwrng_fillfn() while being stopped with the lock held, we convert current_rng to RCU, so that get_current_rng() can read current_rng without holding the lock. To remove the lock from put_rng(), we also delay the actual cleanup into a work_struct. Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR() checks are removed from its callers. With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns directly after current_rng is dropped, kthread_stop() would be called on a freed task_struct later. To fix this, hwrng_fillfn() calls schedule() now to keep the task alive until being stopped. The kthread_stop() call is also moved from hwrng_unregister() to drop_current_rng(), ensuring kthread_stop() is called on all possible paths where current_rng becomes NULL, so that the thread would not wait forever.(CVE-2026-45949) In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1](CVE-2026-53115) In the Linux kernel, the following vulnerability has been resolved: vdpa: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1](CVE-2026-53118) In the Linux kernel, the following vulnerability has been resolved: fs/mbcache: cancel shrink work before destroying the cache mb_cache_destroy() calls shrinker_free() and then frees all cache entries and the cache itself, but it does not cancel the pending c_shrink_work work item first. If mb_cache_entry_create() schedules c_shrink_work via schedule_work() and the work item is still pending or running when mb_cache_destroy() runs, mb_cache_shrink_worker() will access the cache after its memory has been freed, causing a use-after-free. This is only reachable by a privileged user (root or CAP_SYS_ADMIN) who can trigger the last put of a mounted ext2/ext4/ocfs2 filesystem. Cancel the work item with cancel_work_sync() before calling shrinker_free(), ensuring the worker has finished and will not be rescheduled before the cache is torn down.(CVE-2026-53129) In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;) and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since most are connector- based) 256 is a generous upper bound. (cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93)(CVE-2026-53138) In the Linux kernel, the following vulnerability has been resolved: erofs: fix use-after-free on sbi->sync_decompress z_erofs_decompress_kickoff() can race with filesystem unmount, causing a use-after-free on sbi->sync_decompress. When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff() to queue z_erofs_decompressqueue_work() asynchronously. Then, after all folios are unlocked, unmount workflow can proceed and sbi will be freed before accessing to sbi->sync_decompress. Thread (unmount) I/O completion kworker queue_work z_erofs_decompressqueue_work (all folios are unlocked) cleanup_mnt .. erofs_kill_sb erofs_sb_free kfree(sbi) access sbi->sync_decompress // UAF!!(CVE-2026-53272) In the Linux kernel, the following vulnerability has been resolved: KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying When marking a page dirty, complain about not having a running/loaded vCPU if and only if the VM is still alive, i.e. its refcount is non-zero. This will allow fixing a memory leak for x86 SEV-ES guests without hitting what is effectively a false positive on the WARN. For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page across an exit to userspace, and typically unmaps the page on the next KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM needs to unmap the page when the vCPU is destroyed, which in turn triggers the WARN about not having a running vCPU. Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN, as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons; suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But loading a vCPU during destruction is gross (ideally nVMX code would be cleaned up), risks complicating the SEV-ES code (KVM would need to ensure the temporarily load()+put() only runs when the vCPU isn't already loaded), and is ultimately pointless. The motivation for the WARN is to guard against KVM dirtying guest memory without pushing the corresponding GFN to the active vCPU's dirty ring, e.g. to ensure userspace doesn't miss a dirty page. But for the VM's refcount to reach zero, there can't be _any_ userspace mappings to the dirty ring, as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if userspace had a valid mapping for the dirty ring, then the vCPU file and thus the owning VM would still be alive. And so since userspace can't possibly reach the dirty ring, whether or not KVM technically "misses" a push to the dirty ring is irrelevant.(CVE-2026-53345) In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: don't leak bad clone into future transaction On memory allocation failure the cloned nft_pipapo_match can enter a bad state: - some fields can have their lookup tables resized while others did not - bits might have been toggled - scratch map can be undersized which also means m->bsize_max can be lower than what is required This means that the next insertion in the same batch can trigger out-of-bounds writes. Furthermore, a failure in the first can result in the bad clone to leak into the next transaction because the abort callback is never executed in this case (the upper layer saw an error and no attempt to allocate a transactional request was made). Record a state for the nft_pipapo_match structure: - NEW (pristine clone) - MOD (modified clone with good state) - ERR (potentially bogus content) Then make it so that deletes and insertions fail when the clone entered ERR state. In case the very first insert attempt results in an error, free the clone right away.(CVE-2026-72252) In the Linux kernel, the following vulnerability has been resolved: sched/psi: Shut down rtpoll_timer in psi_cgroup_free() psi_schedule_rtpoll_work() is called locklessly from the scheduler hotpath and can race psi_trigger_destroy() taking down the last rtpoll trigger under rtpoll_trigger_lock: psi_schedule_rtpoll_work() psi_trigger_destroy() rcu_read_lock(); task = rcu_dereference(rtpoll_task); rcu_assign_pointer(rtpoll_task, NULL); timer_delete(&rtpoll_timer); mod_timer(&rtpoll_timer, ...); rcu_read_unlock(); synchronize_rcu(); kthread_stop(task_to_destroy); The group can then be freed with the re-armed timer still pending, and poll_timer_fn() runs on freed memory. 461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling mechanism") deleted the timer synchronously after the synchronize_rcu(), which prevented this but raced trigger creation instead: the deletion could cancel the timer that a new trigger set armed during the grace period and, as creation also reinitialized the timer at the time, corrupt it. 8f91efd870ea ("psi: Fix race between psi_trigger_create/destroy") moved the initialization into group_init() and the deletion into the locked section, trading the creation races for the window above. Neither placement in the destruction path works. A pending timer firing while the group is alive is harmless though. poll_timer_fn() just wakes the rtpoll waitqueue and doesn't re-arm itself. Bind the timer to the group's lifetime instead and shut it down in psi_cgroup_free(). Nothing can arm it by then. timer_shutdown_sync() because the timer is never armed again.(CVE-2026-74594) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix accept list UAF during suspend hci_update_event_filter_sync() walks hdev->accept_list while sending a synchronous HCI command for each remote-wakeup device. The suspend path holds hdev->req_lock, but accept-list updates are serialized by hdev->lock. Consequently, remove_device() can free the current list entry during the controller wait. The following interleaving causes the use-after-free: hci_update_event_filter_sync() remove_device() fetch accept-list entry hci_set_event_filter_sync() wait for controller response hci_dev_lock() list_del() kfree() hci_dev_unlock() read the freed list.next KASAN reported: BUG: KASAN: slab-use-after-free in hci_suspend_sync+0x835/0x910 Read of size 8 at addr ffff88810bec8440 by task kworker/0:1/10 Workqueue: events vhci_suspend_work Call Trace: hci_suspend_sync+0x835/0x910 hci_suspend_dev+0x182/0x450 process_one_work+0x661/0x1090 worker_thread+0x45b/0xd10 Allocated by task 86: hci_bdaddr_list_add_with_flags+0x1a8/0x400 add_device+0x381/0x820 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 91: kfree+0x131/0x3c0 remove_device+0x429/0xb70 hci_sock_sendmsg+0x1033/0x1ea0 Snapshot the remote-wakeup addresses under hdev->lock. Release the lock before sending HCI commands. Clear the controller event filter before building the snapshot, and skip allocation and the second list traversal when there are no matching entries. This preserves the original filter and scan-state updates without retaining an accept-list node across a controller wait.(CVE-2026-80762) In the Linux kernel, the following vulnerability has been resolved: fbdev: Wrap user-invoked calls to fb_set_var() in helper Handle fbcon during display updates in fb_set_var_from_user(). Check with fbcon if the mode change is possible, update hardware state and finally update fbcon. Update all callers. Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other mode-changes callers in sysfs and driver code are missing fbcon-related steps. With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain fbcon state themselves.(CVE-2026-80786) In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix OOB in free_rd_atomic_resources() free_rd_atomic_resources() iterates using qp->attr.max_dest_rd_atomic. Updating max_dest_rd_atomic before freeing the old array can make the free path walk past the old allocation and trigger a slab out-of-bounds write catched by KASAN: ================================================================== BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resource drivers/infiniband/sw/rxe/rxe_qp.c:180 [inline] BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:171 [inline] BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:163 [inline] BUG: KASAN: slab-out-of-bounds in rxe_qp_from_attr+0x1e88/0x2150 drivers/infiniband/sw/rxe/rxe_qp.c:712 Write of size 4 at addr ffff88802b8dddb8 by task syz.3.451/11063 CPU: 0 UID: 0 PID: 11063 Comm: syz.3.451 Not tainted 7.1.0 #2 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x10e/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xf7/0x600 mm/kasan/report.c:482 kasan_report+0xe4/0x120 mm/kasan/report.c:595 free_rd_atomic_resource drivers/infiniband/sw/rxe/rxe_qp.c:180 [inline] free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:171 [inline] free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:163 [inline] rxe_qp_from_attr+0x1e88/0x2150 drivers/infiniband/sw/rxe/rxe_qp.c:712 rxe_modify_qp+0x1e2/0x530 drivers/infiniband/sw/rxe/rxe_verbs.c:623 ib_security_modify_qp+0x223/0xfa0 drivers/infiniband/core/security.c:625 _ib_modify_qp+0x333/0xec0 drivers/infiniband/core/verbs.c:1915 modify_qp+0x13ca/0x1940 drivers/infiniband/core/uverbs_cmd.c:1932 ib_uverbs_modify_qp+0xcb/0x120 drivers/infiniband/core/uverbs_cmd.c:1958 ib_uverbs_write+0xb86/0x1030 drivers/infiniband/core/uverbs_main.c:680 vfs_write+0x2aa/0x1070 fs/read_write.c:686 ksys_write+0x1f8/0x250 fs/read_write.c:740 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fefc75a70cd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fefc8495018 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fefc7835fa0 RCX: 00007fefc75a70cd RDX: 0000000000000078 RSI: 0000200000000240 RDI: 0000000000000007 RBP: 00007fefc764f10f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fefc7836038 R14: 00007fefc7835fa0 R15: 00007ffcf0586aa0 </TASK> Allocated by task 11063: kasan_save_stack+0x33/0x60 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5296 [inline] __kmalloc_noprof+0x32a/0x850 mm/slub.c:5308 kmalloc_noprof include/linux/slab.h:954 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] alloc_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:155 [inline] rxe_qp_from_attr+0x3f8/0x2150 drivers/infiniband/sw/rxe/rxe_qp.c:714 rxe_modify_qp+0x1e2/0x530 drivers/infiniband/sw/rxe/rxe_verbs.c:623 ib_security_modify_qp+0x223/0xfa0 drivers/infiniband/core/security.c:625 _ib_modify_qp+0x333/0xec0 drivers/infiniband/core/verbs.c:1915 modify_qp+0x13ca/0x1940 drivers/infiniband/core/uverbs_cmd.c:1932 ib_uverbs_modify_qp+0xcb/0x120 drivers/infiniband/core/uverbs_cmd.c:1958 ib_uverbs_write+0xb86/0x1030 drivers/infiniband/core/uverbs_ma ---truncated---(CVE-2026-80863) In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix responder UAF on IB_QP_MAX_DEST_RD_ATOMIC modify_qp rxe_qp_from_attr() handles IB_QP_MAX_DEST_RD_ATOMIC outside the IB_QP_STATE path, so it holds no state_lock and runs while the responder task rxe_receiver() (recv_task on rxe_wq) is live. A modify_qp() setting only that attribute calls free_rd_atomic_resources() then alloc_rd_atomic_resources(), swapping qp->resp.resources[] while rxe_prepare_res()/find_resource() walk it; free_rd_atomic_resources() also leaves the cached pointer qp->resp.res dangling. A local unprivileged user can race the free/realloc into a use-after-free in rxe_receiver() (local DoS). Drain recv_task around the swap with rxe_disable_task()/rxe_enable_task(), as rxe_qp_reset() already does when tearing this array down, re-enabling only after alloc_rd_atomic_resources() succeeds so the responder never resumes against a NULL qp->resp.resources on the ENOMEM path. Also clear qp->resp.res in free_rd_atomic_resources(), like the rxe_resp.c completion paths. Reproduced under KASAN; the slab-use-after-free in rxe_receiver() is gone.(CVE-2026-80864) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready iso_conn_ready() looks up the BIS listener socket with iso_get_sock(), which takes a reference, and then, without re-checking its state, creates a child socket from it: parent = iso_get_sock(hdev, ...); if (!parent) return; lock_sock(parent); sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...); ... iso_chan_add(conn, sk, parent); ... release_sock(parent); sock_put(parent); If the listener socket is closed concurrently, between iso_get_sock() and lock_sock(), the reference taken by iso_get_sock() may be the last one: the close path drops the link-list reference, and once iso_conn_ready() drops its own reference at the end of the function the socket is freed. The child socket, however, is already linked to the freed parent, and a later disconnect of the child runs iso_chan_del() -> bt_accept_unlink(), which dereferences the dangling parent pointer into the freed accept queue (a use-after-free). The same dangling pointer is also dereferenced through parent->***() in iso_chan_del(). Fix it the same way the connected (non-BIS) path was fixed in commit 0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"): after taking the socket lock, re-check that the parent is still a listening, alive socket, and bail out otherwise.(CVE-2026-80914) In the Linux kernel, the following vulnerability has been resolved: fbdev: ssd1307fb: defer I2C transfers from damage callbacks The fbdev damage callbacks may run from fbcon while printk has disabled preemption. They currently update the display synchronously, which enters the sleeping I2C transfer path from atomic context. A complete report from an RK3566 system follows: [ 258.129004] watchdog: watchdog0: watchdog did not stop! [ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003 [ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1 ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine v4l2_vp9 snd_pcm v4l2_h264 rockchip_rga snd_timer rk_crypto2 spi_rockchip_sfc videobuf2_dma_contig snd sm3_generic v4l2_mem2mem videobuf2_dma_sg dwmac_rk sm3 soundcore videobuf2_memops videobuf2_v4l2 stmmac_platform dw_hdmi_cec videodev videobuf2_common dw_hdmi_i2s_audio stmmac rk817_charger pcs_xpcs mc cpufreq_dt sch_fq_codel ip_tables x_tables autofs4 [ 258.129215] Preemption disabled at: [ 258.129216] [<ffff80008012f96c>] vprintk_emit+0x11c/0x340 [ 258.129234] CPU: 0 PID: 1 Comm: systemd Tainted: G C 6.6.0-rc5-rockchip-rk356x #4 [ 258.129239] Hardware name: Rockchip RK3566 OPi 3B (DT) [ 258.129243] Call trace: [ 258.129245] dump_backtrace+0xa0/0x128 [ 258.129252] show_stack+0x20/0x38 [ 258.129256] dump_stack_lvl+0x60/0xb0 [ 258.129265] dump_stack+0x18/0x28 [ 258.129269] __schedule_bug+0xa0/0xc8 [ 258.129274] __schedule+0x9ac/0xd30 [ 258.129279] schedule+0x60/0x100 [ 258.129282] schedule_timeout+0x194/0x338 [ 258.129289] rk3x_i2c_xfer_common.isra.0+0x384/0x498 [ 258.129296] rk3x_i2c_xfer+0x20/0x60 [ 258.129300] __i2c_transfer+0x194/0x648 [ 258.129308] i2c_transfer+0x9c/0x130 [ 258.129313] i2c_transfer_buffer_flags+0x64/0x98 [ 258.129318] ssd1307fb_update_rect+0x42c/0x560 [ssd1307fb] [ 258.129334] ssd1307fb_defio_imageblit+0x34/0x50 [ssd1307fb] [ 258.129343] soft_cursor+0x13c/0x210 [ 258.129350] bit_cursor+0x2dc/0x550 [ 258.129354] fbcon_cursor+0xec/0x108 [ 258.129359] hide_cursor+0x44/0xc8 [ 258.129365] vt_console_print+0x398/0x3b0 [ 258.129370] console_flush_all.isra.0+0x17c/0x410 [ 258.129377] console_unlock+0x4c/0x100 [ 258.129382] vprintk_emit+0x1c8/0x340 [ 258.129386] vprintk_default+0x40/0x58 [ 258.129389] vprintk+0xb8/0xd0 [ 258.129392] _printk+0x68/0x98 [ 258.129398] watchdog_release+0x170/0x230 [ 258.129404] __fput+0xbc/0x288 [ 258.129409] __fput_sync+0x58/0x70 [ 258.129413] __arm64_sys_close+0x40/0x90 [ 258.129419] invoke_syscall+0x4c/0x118 [ 258.129426] el0_svc_common.constprop.0+0x48/0xf0 [ 258.129432] do_el0_svc+0x24/0x38 [ 258.129437] el0_svc+0x48/0x100 [ 258.129443] el0t_64_sync_handler+0xc0/0xc8 [ 258.129448] el0t_64_sync+0x190/0x198 [ 258.573087] ------------[ cut here ]------------ [ 258.573098] DEBUG_LOCKS_WARN_ON(val > preempt_count()) [ 258.573111] WARNING: CPU: 0 PID: 1 at kernel/sched/core.c:5871 preempt_count_sub+0x9c/0x148 [ 258.573130] Modules linked in: algif_hash algif_skcipher af_alg bnep binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1 ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine v4l2_vp ---truncated---(CVE-2026-89598) In the Linux kernel, the following vulnerability has been resolved: eventfs: Initialize ei->children and ei->list in init_ei() eventfs_create_dir() allocates the eventfs_inode and initializes it with init_ei(). But this does not initialize the eventfs_inode list_heads. If the eventfs_create_dir() fails due to memory pressure, it will call free_ei() before it initialized the lists, and that checks to make sure the eventfs_inode has no children. But because the list wasn't initialized, it will give a false warning. Fix it by moving the list initialization into init_ei(). [ Rewrote change log ](CVE-2026-89618) In the Linux kernel, the following vulnerability has been resolved: smb: client: fix ALIGN() overflow in symlink_data() error context loop The check added by commit 7d9a7f1f96cd ("smb/client: fix possible infinite loop and oob read in symlink_data()") compared the post-ALIGN length against the remaining buffer, but ALIGN() itself can overflow: for ErrorDataLength near UINT32_MAX (e.g. 0xFFFFFFF9), ALIGN(x, 8) wraps to 0, so the subsequent bounds check passes, and the loop advances by zero bytes leaving 'p' pointing into stale data. Fix by checking the raw ErrorDataLength against the remaining space before applying ALIGN(), then checking again after. Since raw_len is bounded by the buffer, raw_len + 7 cannot overflow, so the second check is an exact post-alignment bounds guard.(CVE-2026-89634) In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2 When a valid primary TRANSACT2 response has been received (mid->resp_buf set, mid->multiRsp true) and a subsequent secondary response causes cifs_check_trans2() to return false -- either because the SMB header is invalid (malformed != 0) or because check2ndT2() rejects the PDU -- handle_mid() overwrites mid->resp_buf with the new buffer (leaking the primary buffer) and, because mid->multiRsp is set, skips the server->smallbuf/bigbuf NULL-out. When the user thread frees mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the demux thread reuses it for the next packet, resulting in a use-after-free. Combine both early-exit conditions and, when mid->multiRsp is already set, abort the pending transaction inline: set multiEnd, call dequeue_mid() with malformed=true, and return true so handle_mid() exits without touching mid->resp_buf or the server buffer pointers.(CVE-2026-89637) In the Linux kernel, the following vulnerability has been resolved: ceph: bound copied dentry name length in NFS export get_name ceph_get_name() copies the MDS-supplied name into the caller's NAME_MAX-sized buffer with memcpy(name, rinfo->dname, rinfo->dname_len) and then writes name[rinfo->dname_len] = 0, without checking dname_len against NAME_MAX. A malicious or buggy MDS that returns a LOOKUPNAME reply with dname_len > NAME_MAX overflows the buffer. __get_snap_name() copies rde->name / rde->name_len the same unchecked way. Impact: a malicious or compromised Ceph MDS overflows the NAME_MAX name buffer in a client's NFS-export get_name path, a slab out-of-bounds write reported by KASAN. Reachable when a CephFS mount is re-exported over NFS. Add ceph_export_copy_name(), which rejects lengths above NAME_MAX with -ENAMETOOLONG before the copy, and use it in both ceph_get_name() and __get_snap_name().(CVE-2026-89652) In the Linux kernel, the following vulnerability has been resolved: ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock list_for_each_entry() iterates ci->i_cap_flush_list but drops i_ceph_lock to send cap messages. During the unlock window, handle_cap_flush_ack() can acquire i_ceph_lock, detach cf entries with tid <= flush_tid from the list, release i_ceph_lock, and free them via ceph_free_cap_flush() outside any lock. When the original thread reacquires i_ceph_lock and the for-loop macro advances via cf = list_next_entry(cf, i_list), it dereferences cf->i_list.next on freed memory. The race timeline: __kick_flushing_caps() handle_cap_flush_ack() ----------------------- ----------------------- holds i_ceph_lock <--- iterates to cf (tid=10) prepares FLUSH message drops i_ceph_lock <--- __send_cap() ── FLUSH(tid=10) MDS sends FLUSH_ACK(tid=10) ---> acquires i_ceph_lock cf->tid(10) <= flush_tid(10), detaches cf from i_cap_flush_list drops i_ceph_lock ceph_free_cap_flush(cf) <- frees it! acquires i_ceph_lock <--- for-loop advances: cf = list_next_entry(cf, i_list) -- UAF on freed cf->i_list.next The cf was just sent by __kick_flushing_caps itself via __send_cap(). The MDS may respond with FLUSH_ACK quickly enough that handle_cap_flush_ack() frees cf before __kick_flushing_caps can finish the iteration. Fix by converting to a manual while loop: save the next pointer under i_ceph_lock before dropping it, then use the saved pointer after reacquiring, so the potentially-freed cf is never accessed again.(CVE-2026-89655) In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash passing ERR_PTR to kthread_stop() event_test_stuff() calls kthread_run() and unconditionally passes the returned task_struct pointer to kthread_stop(). kthread_run() returns an error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for example under memory pressure during the boot-time event self-test. kthread_stop() then dereferences the invalid pointer, crashing the kernel. Check the result of kthread_run() before passing it to kthread_stop(). Use WARN_ON() so that a failure to create the self-test thread does not go unnoticed, matching the ring-buffer self-test fix in commit 91542863abad ("ring-buffer: Fix crash passing ERR_PTR to kthread_stop()").(CVE-2026-89749) An update for kernel is now available for openEuler-24.03-LTS-SP1/openEuler-22.03-LTS-SP3/openEuler-24.03-LTS/openEuler-24.03-LTS-SP2. openEuler Security has rated this update as having a security impact of critical. A Common Vunlnerability Scoring System(CVSS)base score,which gives a detailed severity rating, is available for each vulnerability from the CVElink(s) in the References section. Critical kernel https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45943 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45947 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-45949 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53115 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53118 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53129 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53138 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53272 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53345 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-72252 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-74594 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-80762 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-80786 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-80863 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-80864 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-80914 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-89598 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-89618 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-89634 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-89637 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-89652 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-89655 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-89749 https://nvd.nist.gov/vuln/detail/CVE-2026-45943 https://nvd.nist.gov/vuln/detail/CVE-2026-45947 https://nvd.nist.gov/vuln/detail/CVE-2026-45949 https://nvd.nist.gov/vuln/detail/CVE-2026-53115 https://nvd.nist.gov/vuln/detail/CVE-2026-53118 https://nvd.nist.gov/vuln/detail/CVE-2026-53129 https://nvd.nist.gov/vuln/detail/CVE-2026-53138 https://nvd.nist.gov/vuln/detail/CVE-2026-53272 https://nvd.nist.gov/vuln/detail/CVE-2026-53345 https://nvd.nist.gov/vuln/detail/CVE-2026-72252 https://nvd.nist.gov/vuln/detail/CVE-2026-74594 https://nvd.nist.gov/vuln/detail/CVE-2026-80762 https://nvd.nist.gov/vuln/detail/CVE-2026-80786 https://nvd.nist.gov/vuln/detail/CVE-2026-80863 https://nvd.nist.gov/vuln/detail/CVE-2026-80864 https://nvd.nist.gov/vuln/detail/CVE-2026-80914 https://nvd.nist.gov/vuln/detail/CVE-2026-89598 https://nvd.nist.gov/vuln/detail/CVE-2026-89618 https://nvd.nist.gov/vuln/detail/CVE-2026-89634 https://nvd.nist.gov/vuln/detail/CVE-2026-89637 https://nvd.nist.gov/vuln/detail/CVE-2026-89652 https://nvd.nist.gov/vuln/detail/CVE-2026-89655 https://nvd.nist.gov/vuln/detail/CVE-2026-89749 openEuler-24.03-LTS-SP1 bpftool-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm bpftool-debuginfo-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm kernel-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm kernel-debuginfo-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm kernel-debugsource-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm kernel-devel-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm kernel-headers-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm kernel-source-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm kernel-tools-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm kernel-tools-debuginfo-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm kernel-tools-devel-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm perf-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm perf-debuginfo-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm python3-perf-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm python3-perf-debuginfo-6.6.0-145.1.28.165.oe2403sp1.x86_64.rpm kernel-6.6.0-145.1.28.165.oe2403sp1.src.rpm bpftool-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm bpftool-debuginfo-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm kernel-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm kernel-debuginfo-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm kernel-debugsource-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm kernel-devel-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm kernel-headers-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm kernel-source-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm kernel-tools-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm kernel-tools-debuginfo-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm kernel-tools-devel-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm perf-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm perf-debuginfo-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm python3-perf-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm python3-perf-debuginfo-6.6.0-145.1.28.165.oe2403sp1.aarch64.rpm In the Linux kernel, the following vulnerability has been resolved: erofs: fix inline data read failure for ztailpacking pclusters Compressed folios for ztailpacking pclusters must be valid before adding these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster() may assume they are already valid and then trigger a NULL pointer dereference. It is somewhat hard to reproduce because the inline data is in the same block as the tail of the compressed indexes, which are usually read just before. However, it may still happen if a fatal signal arrives while read_mapping_folio() is running, as shown below: erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : z_erofs_decompress_queue+0x4c8/0xa14 lr : z_erofs_decompress_queue+0x160/0xa14 sp : ffffffc08b3eb3a0 x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000 x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001 x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700 x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098 x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004 x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9 x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: z_erofs_decompress_queue+0x4c8/0xa14 z_erofs_runqueue+0x908/0x97c z_erofs_read_folio+0x128/0x228 filemap_read_folio+0x68/0x128 filemap_get_pages+0x44c/0x8b4 filemap_read+0x12c/0x5b8 generic_file_read_iter+0x4c/0x15c do_iter_readv_writev+0x188/0x1e0 vfs_iter_read+0xac/0x1a4 backing_file_read_iter+0x170/0x34c ovl_read_iter+0xf0/0x140 vfs_read+0x28c/0x344 ksys_read+0x80/0xf0 __arm64_sys_read+0x24/0x34 invoke_syscall+0x60/0x114 el0_svc_common+0x88/0xe4 do_el0_svc+0x24/0x30 el0_svc+0x40/0xa8 el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1bc/0x1c0 Fix this by reading the inline data before allocating and adding the pclusters to the I/O chains. 2026-10-16 CVE-2026-45943 openEuler-24.03-LTS-SP1 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_acpi_enumerate_xcc() In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM, the function returns directly without releasing the allocated xcc_info, resulting in a memory leak. Fix this by ensuring that xcc_info is properly freed in the error paths. Compile tested only. Issue found using a prototype static analysis tool and code review. 2026-10-16 CVE-2026-45947 openEuler-24.03-LTS-SP1 Low 3.3 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: hwrng: core - use RCU and work_struct to fix race condition Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex lock, a concurrent hwrng_unregister() may call kthread_stop() again on the same task. Additionally, if hwrng_unregister() is called immediately after hwrng_register(), the stopped thread may have never been executed. Thus, hwrng_fill remains dirty even after hwrng_unregister() returns. In this case, subsequent calls to hwrng_register() will fail to start new threads, and hwrng_unregister() will call kthread_stop() on the same freed task. In both cases, a use-after-free occurs: refcount_t: addition on 0; use-after-free. WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0 Call Trace: kthread_stop+0x181/0x360 hwrng_unregister+0x288/0x380 virtrng_remove+0xe3/0x200 This patch fixes the race by protecting the global hwrng_fill pointer inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only once, and calls to kthread_run() and kthread_stop() are serialized with the lock held. To avoid deadlock in hwrng_fillfn() while being stopped with the lock held, we convert current_rng to RCU, so that get_current_rng() can read current_rng without holding the lock. To remove the lock from put_rng(), we also delay the actual cleanup into a work_struct. Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR() checks are removed from its callers. With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns directly after current_rng is dropped, kthread_stop() would be called on a freed task_struct later. To fix this, hwrng_fillfn() calls schedule() now to keep the task alive until being stopped. The kthread_stop() call is also moved from hwrng_unregister() to drop_current_rng(), ensuring kthread_stop() is called on all possible paths where current_rng becomes NULL, so that the thread would not wait forever. 2026-10-16 CVE-2026-45949 openEuler-24.03-LTS-SP1 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] 2026-10-16 CVE-2026-53115 openEuler-24.03-LTS-SP1 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: vdpa: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] 2026-10-16 CVE-2026-53118 openEuler-24.03-LTS-SP1 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: fs/mbcache: cancel shrink work before destroying the cache mb_cache_destroy() calls shrinker_free() and then frees all cache entries and the cache itself, but it does not cancel the pending c_shrink_work work item first. If mb_cache_entry_create() schedules c_shrink_work via schedule_work() and the work item is still pending or running when mb_cache_destroy() runs, mb_cache_shrink_worker() will access the cache after its memory has been freed, causing a use-after-free. This is only reachable by a privileged user (root or CAP_SYS_ADMIN) who can trigger the last put of a mounted ext2/ext4/ocfs2 filesystem. Cancel the work item with cancel_work_sync() before calling shrinker_free(), ensuring the worker has finished and will not be rescheduled before the cache is torn down. 2026-10-16 CVE-2026-53129 openEuler-24.03-LTS-SP1 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;) and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since most are connector- based) 256 is a generous upper bound. (cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93) 2026-10-16 CVE-2026-53138 openEuler-24.03-LTS-SP1 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: erofs: fix use-after-free on sbi->sync_decompress z_erofs_decompress_kickoff() can race with filesystem unmount, causing a use-after-free on sbi->sync_decompress. When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff() to queue z_erofs_decompressqueue_work() asynchronously. Then, after all folios are unlocked, unmount workflow can proceed and sbi will be freed before accessing to sbi->sync_decompress. Thread (unmount) I/O completion kworker queue_work z_erofs_decompressqueue_work (all folios are unlocked) cleanup_mnt .. erofs_kill_sb erofs_sb_free kfree(sbi) access sbi->sync_decompress // UAF!! 2026-10-16 CVE-2026-53272 openEuler-24.03-LTS-SP1 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying When marking a page dirty, complain about not having a running/loaded vCPU if and only if the VM is still alive, i.e. its refcount is non-zero. This will allow fixing a memory leak for x86 SEV-ES guests without hitting what is effectively a false positive on the WARN. For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page across an exit to userspace, and typically unmaps the page on the next KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM needs to unmap the page when the vCPU is destroyed, which in turn triggers the WARN about not having a running vCPU. Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN, as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons; suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But loading a vCPU during destruction is gross (ideally nVMX code would be cleaned up), risks complicating the SEV-ES code (KVM would need to ensure the temporarily load()+put() only runs when the vCPU isn't already loaded), and is ultimately pointless. The motivation for the WARN is to guard against KVM dirtying guest memory without pushing the corresponding GFN to the active vCPU's dirty ring, e.g. to ensure userspace doesn't miss a dirty page. But for the VM's refcount to reach zero, there can't be _any_ userspace mappings to the dirty ring, as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if userspace had a valid mapping for the dirty ring, then the vCPU file and thus the owning VM would still be alive. And so since userspace can't possibly reach the dirty ring, whether or not KVM technically "misses" a push to the dirty ring is irrelevant. 2026-10-16 CVE-2026-53345 openEuler-24.03-LTS-SP1 Low 2.5 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: don't leak bad clone into future transaction On memory allocation failure the cloned nft_pipapo_match can enter a bad state: - some fields can have their lookup tables resized while others did not - bits might have been toggled - scratch map can be undersized which also means m->bsize_max can be lower than what is required This means that the next insertion in the same batch can trigger out-of-bounds writes. Furthermore, a failure in the first can result in the bad clone to leak into the next transaction because the abort callback is never executed in this case (the upper layer saw an error and no attempt to allocate a transactional request was made). Record a state for the nft_pipapo_match structure: - NEW (pristine clone) - MOD (modified clone with good state) - ERR (potentially bogus content) Then make it so that deletes and insertions fail when the clone entered ERR state. In case the very first insert attempt results in an error, free the clone right away. 2026-10-16 CVE-2026-72252 openEuler-24.03-LTS-SP1 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: sched/psi: Shut down rtpoll_timer in psi_cgroup_free() psi_schedule_rtpoll_work() is called locklessly from the scheduler hotpath and can race psi_trigger_destroy() taking down the last rtpoll trigger under rtpoll_trigger_lock: psi_schedule_rtpoll_work() psi_trigger_destroy() rcu_read_lock(); task = rcu_dereference(rtpoll_task); rcu_assign_pointer(rtpoll_task, NULL); timer_delete(&rtpoll_timer); mod_timer(&rtpoll_timer, ...); rcu_read_unlock(); synchronize_rcu(); kthread_stop(task_to_destroy); The group can then be freed with the re-armed timer still pending, and poll_timer_fn() runs on freed memory. 461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling mechanism") deleted the timer synchronously after the synchronize_rcu(), which prevented this but raced trigger creation instead: the deletion could cancel the timer that a new trigger set armed during the grace period and, as creation also reinitialized the timer at the time, corrupt it. 8f91efd870ea ("psi: Fix race between psi_trigger_create/destroy") moved the initialization into group_init() and the deletion into the locked section, trading the creation races for the window above. Neither placement in the destruction path works. A pending timer firing while the group is alive is harmless though. poll_timer_fn() just wakes the rtpoll waitqueue and doesn't re-arm itself. Bind the timer to the group's lifetime instead and shut it down in psi_cgroup_free(). Nothing can arm it by then. timer_shutdown_sync() because the timer is never armed again. 2026-10-16 CVE-2026-74594 openEuler-24.03-LTS-SP1 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix accept list UAF during suspend hci_update_event_filter_sync() walks hdev->accept_list while sending a synchronous HCI command for each remote-wakeup device. The suspend path holds hdev->req_lock, but accept-list updates are serialized by hdev->lock. Consequently, remove_device() can free the current list entry during the controller wait. The following interleaving causes the use-after-free: hci_update_event_filter_sync() remove_device() fetch accept-list entry hci_set_event_filter_sync() wait for controller response hci_dev_lock() list_del() kfree() hci_dev_unlock() read the freed list.next KASAN reported: BUG: KASAN: slab-use-after-free in hci_suspend_sync+0x835/0x910 Read of size 8 at addr ffff88810bec8440 by task kworker/0:1/10 Workqueue: events vhci_suspend_work Call Trace: hci_suspend_sync+0x835/0x910 hci_suspend_dev+0x182/0x450 process_one_work+0x661/0x1090 worker_thread+0x45b/0xd10 Allocated by task 86: hci_bdaddr_list_add_with_flags+0x1a8/0x400 add_device+0x381/0x820 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 91: kfree+0x131/0x3c0 remove_device+0x429/0xb70 hci_sock_sendmsg+0x1033/0x1ea0 Snapshot the remote-wakeup addresses under hdev->lock. Release the lock before sending HCI commands. Clear the controller event filter before building the snapshot, and skip allocation and the second list traversal when there are no matching entries. This preserves the original filter and scan-state updates without retaining an accept-list node across a controller wait. 2026-10-16 CVE-2026-80762 openEuler-24.03-LTS-SP1 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: fbdev: Wrap user-invoked calls to fb_set_var() in helper Handle fbcon during display updates in fb_set_var_from_user(). Check with fbcon if the mode change is possible, update hardware state and finally update fbcon. Update all callers. Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other mode-changes callers in sysfs and driver code are missing fbcon-related steps. With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain fbcon state themselves. 2026-10-16 CVE-2026-80786 openEuler-24.03-LTS-SP1 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix OOB in free_rd_atomic_resources() free_rd_atomic_resources() iterates using qp->attr.max_dest_rd_atomic. Updating max_dest_rd_atomic before freeing the old array can make the free path walk past the old allocation and trigger a slab out-of-bounds write catched by KASAN: ================================================================== BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resource drivers/infiniband/sw/rxe/rxe_qp.c:180 [inline] BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:171 [inline] BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:163 [inline] BUG: KASAN: slab-out-of-bounds in rxe_qp_from_attr+0x1e88/0x2150 drivers/infiniband/sw/rxe/rxe_qp.c:712 Write of size 4 at addr ffff88802b8dddb8 by task syz.3.451/11063 CPU: 0 UID: 0 PID: 11063 Comm: syz.3.451 Not tainted 7.1.0 #2 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x10e/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xf7/0x600 mm/kasan/report.c:482 kasan_report+0xe4/0x120 mm/kasan/report.c:595 free_rd_atomic_resource drivers/infiniband/sw/rxe/rxe_qp.c:180 [inline] free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:171 [inline] free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:163 [inline] rxe_qp_from_attr+0x1e88/0x2150 drivers/infiniband/sw/rxe/rxe_qp.c:712 rxe_modify_qp+0x1e2/0x530 drivers/infiniband/sw/rxe/rxe_verbs.c:623 ib_security_modify_qp+0x223/0xfa0 drivers/infiniband/core/security.c:625 _ib_modify_qp+0x333/0xec0 drivers/infiniband/core/verbs.c:1915 modify_qp+0x13ca/0x1940 drivers/infiniband/core/uverbs_cmd.c:1932 ib_uverbs_modify_qp+0xcb/0x120 drivers/infiniband/core/uverbs_cmd.c:1958 ib_uverbs_write+0xb86/0x1030 drivers/infiniband/core/uverbs_main.c:680 vfs_write+0x2aa/0x1070 fs/read_write.c:686 ksys_write+0x1f8/0x250 fs/read_write.c:740 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fefc75a70cd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fefc8495018 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fefc7835fa0 RCX: 00007fefc75a70cd RDX: 0000000000000078 RSI: 0000200000000240 RDI: 0000000000000007 RBP: 00007fefc764f10f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fefc7836038 R14: 00007fefc7835fa0 R15: 00007ffcf0586aa0 </TASK> Allocated by task 11063: kasan_save_stack+0x33/0x60 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5296 [inline] __kmalloc_noprof+0x32a/0x850 mm/slub.c:5308 kmalloc_noprof include/linux/slab.h:954 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] alloc_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:155 [inline] rxe_qp_from_attr+0x3f8/0x2150 drivers/infiniband/sw/rxe/rxe_qp.c:714 rxe_modify_qp+0x1e2/0x530 drivers/infiniband/sw/rxe/rxe_verbs.c:623 ib_security_modify_qp+0x223/0xfa0 drivers/infiniband/core/security.c:625 _ib_modify_qp+0x333/0xec0 drivers/infiniband/core/verbs.c:1915 modify_qp+0x13ca/0x1940 drivers/infiniband/core/uverbs_cmd.c:1932 ib_uverbs_modify_qp+0xcb/0x120 drivers/infiniband/core/uverbs_cmd.c:1958 ib_uverbs_write+0xb86/0x1030 drivers/infiniband/core/uverbs_ma ---truncated--- 2026-10-16 CVE-2026-80863 openEuler-24.03-LTS-SP1 High 7.3 AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix responder UAF on IB_QP_MAX_DEST_RD_ATOMIC modify_qp rxe_qp_from_attr() handles IB_QP_MAX_DEST_RD_ATOMIC outside the IB_QP_STATE path, so it holds no state_lock and runs while the responder task rxe_receiver() (recv_task on rxe_wq) is live. A modify_qp() setting only that attribute calls free_rd_atomic_resources() then alloc_rd_atomic_resources(), swapping qp->resp.resources[] while rxe_prepare_res()/find_resource() walk it; free_rd_atomic_resources() also leaves the cached pointer qp->resp.res dangling. A local unprivileged user can race the free/realloc into a use-after-free in rxe_receiver() (local DoS). Drain recv_task around the swap with rxe_disable_task()/rxe_enable_task(), as rxe_qp_reset() already does when tearing this array down, re-enabling only after alloc_rd_atomic_resources() succeeds so the responder never resumes against a NULL qp->resp.resources on the ENOMEM path. Also clear qp->resp.res in free_rd_atomic_resources(), like the rxe_resp.c completion paths. Reproduced under KASAN; the slab-use-after-free in rxe_receiver() is gone. 2026-10-16 CVE-2026-80864 openEuler-24.03-LTS-SP1 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready iso_conn_ready() looks up the BIS listener socket with iso_get_sock(), which takes a reference, and then, without re-checking its state, creates a child socket from it: parent = iso_get_sock(hdev, ...); if (!parent) return; lock_sock(parent); sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...); ... iso_chan_add(conn, sk, parent); ... release_sock(parent); sock_put(parent); If the listener socket is closed concurrently, between iso_get_sock() and lock_sock(), the reference taken by iso_get_sock() may be the last one: the close path drops the link-list reference, and once iso_conn_ready() drops its own reference at the end of the function the socket is freed. The child socket, however, is already linked to the freed parent, and a later disconnect of the child runs iso_chan_del() -> bt_accept_unlink(), which dereferences the dangling parent pointer into the freed accept queue (a use-after-free). The same dangling pointer is also dereferenced through parent->***() in iso_chan_del(). Fix it the same way the connected (non-BIS) path was fixed in commit 0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"): after taking the socket lock, re-check that the parent is still a listening, alive socket, and bail out otherwise. 2026-10-16 CVE-2026-80914 openEuler-24.03-LTS-SP1 High 8.8 AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: fbdev: ssd1307fb: defer I2C transfers from damage callbacks The fbdev damage callbacks may run from fbcon while printk has disabled preemption. They currently update the display synchronously, which enters the sleeping I2C transfer path from atomic context. A complete report from an RK3566 system follows: [ 258.129004] watchdog: watchdog0: watchdog did not stop! [ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003 [ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1 ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine v4l2_vp9 snd_pcm v4l2_h264 rockchip_rga snd_timer rk_crypto2 spi_rockchip_sfc videobuf2_dma_contig snd sm3_generic v4l2_mem2mem videobuf2_dma_sg dwmac_rk sm3 soundcore videobuf2_memops videobuf2_v4l2 stmmac_platform dw_hdmi_cec videodev videobuf2_common dw_hdmi_i2s_audio stmmac rk817_charger pcs_xpcs mc cpufreq_dt sch_fq_codel ip_tables x_tables autofs4 [ 258.129215] Preemption disabled at: [ 258.129216] [<ffff80008012f96c>] vprintk_emit+0x11c/0x340 [ 258.129234] CPU: 0 PID: 1 Comm: systemd Tainted: G C 6.6.0-rc5-rockchip-rk356x #4 [ 258.129239] Hardware name: Rockchip RK3566 OPi 3B (DT) [ 258.129243] Call trace: [ 258.129245] dump_backtrace+0xa0/0x128 [ 258.129252] show_stack+0x20/0x38 [ 258.129256] dump_stack_lvl+0x60/0xb0 [ 258.129265] dump_stack+0x18/0x28 [ 258.129269] __schedule_bug+0xa0/0xc8 [ 258.129274] __schedule+0x9ac/0xd30 [ 258.129279] schedule+0x60/0x100 [ 258.129282] schedule_timeout+0x194/0x338 [ 258.129289] rk3x_i2c_xfer_common.isra.0+0x384/0x498 [ 258.129296] rk3x_i2c_xfer+0x20/0x60 [ 258.129300] __i2c_transfer+0x194/0x648 [ 258.129308] i2c_transfer+0x9c/0x130 [ 258.129313] i2c_transfer_buffer_flags+0x64/0x98 [ 258.129318] ssd1307fb_update_rect+0x42c/0x560 [ssd1307fb] [ 258.129334] ssd1307fb_defio_imageblit+0x34/0x50 [ssd1307fb] [ 258.129343] soft_cursor+0x13c/0x210 [ 258.129350] bit_cursor+0x2dc/0x550 [ 258.129354] fbcon_cursor+0xec/0x108 [ 258.129359] hide_cursor+0x44/0xc8 [ 258.129365] vt_console_print+0x398/0x3b0 [ 258.129370] console_flush_all.isra.0+0x17c/0x410 [ 258.129377] console_unlock+0x4c/0x100 [ 258.129382] vprintk_emit+0x1c8/0x340 [ 258.129386] vprintk_default+0x40/0x58 [ 258.129389] vprintk+0xb8/0xd0 [ 258.129392] _printk+0x68/0x98 [ 258.129398] watchdog_release+0x170/0x230 [ 258.129404] __fput+0xbc/0x288 [ 258.129409] __fput_sync+0x58/0x70 [ 258.129413] __arm64_sys_close+0x40/0x90 [ 258.129419] invoke_syscall+0x4c/0x118 [ 258.129426] el0_svc_common.constprop.0+0x48/0xf0 [ 258.129432] do_el0_svc+0x24/0x38 [ 258.129437] el0_svc+0x48/0x100 [ 258.129443] el0t_64_sync_handler+0xc0/0xc8 [ 258.129448] el0t_64_sync+0x190/0x198 [ 258.573087] ------------[ cut here ]------------ [ 258.573098] DEBUG_LOCKS_WARN_ON(val > preempt_count()) [ 258.573111] WARNING: CPU: 0 PID: 1 at kernel/sched/core.c:5871 preempt_count_sub+0x9c/0x148 [ 258.573130] Modules linked in: algif_hash algif_skcipher af_alg bnep binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1 ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine v4l2_vp ---truncated--- 2026-10-16 CVE-2026-89598 openEuler-24.03-LTS-SP1 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: eventfs: Initialize ei->children and ei->list in init_ei() eventfs_create_dir() allocates the eventfs_inode and initializes it with init_ei(). But this does not initialize the eventfs_inode list_heads. If the eventfs_create_dir() fails due to memory pressure, it will call free_ei() before it initialized the lists, and that checks to make sure the eventfs_inode has no children. But because the list wasn't initialized, it will give a false warning. Fix it by moving the list initialization into init_ei(). [ Rewrote change log ] 2026-10-16 CVE-2026-89618 openEuler-24.03-LTS-SP1 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: smb: client: fix ALIGN() overflow in symlink_data() error context loop The check added by commit 7d9a7f1f96cd ("smb/client: fix possible infinite loop and oob read in symlink_data()") compared the post-ALIGN length against the remaining buffer, but ALIGN() itself can overflow: for ErrorDataLength near UINT32_MAX (e.g. 0xFFFFFFF9), ALIGN(x, 8) wraps to 0, so the subsequent bounds check passes, and the loop advances by zero bytes leaving 'p' pointing into stale data. Fix by checking the raw ErrorDataLength against the remaining space before applying ALIGN(), then checking again after. Since raw_len is bounded by the buffer, raw_len + 7 cannot overflow, so the second check is an exact post-alignment bounds guard. 2026-10-16 CVE-2026-89634 openEuler-24.03-LTS-SP1 Critical 9.1 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2 When a valid primary TRANSACT2 response has been received (mid->resp_buf set, mid->multiRsp true) and a subsequent secondary response causes cifs_check_trans2() to return false -- either because the SMB header is invalid (malformed != 0) or because check2ndT2() rejects the PDU -- handle_mid() overwrites mid->resp_buf with the new buffer (leaking the primary buffer) and, because mid->multiRsp is set, skips the server->smallbuf/bigbuf NULL-out. When the user thread frees mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the demux thread reuses it for the next packet, resulting in a use-after-free. Combine both early-exit conditions and, when mid->multiRsp is already set, abort the pending transaction inline: set multiEnd, call dequeue_mid() with malformed=true, and return true so handle_mid() exits without touching mid->resp_buf or the server buffer pointers. 2026-10-16 CVE-2026-89637 openEuler-24.03-LTS-SP1 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: ceph: bound copied dentry name length in NFS export get_name ceph_get_name() copies the MDS-supplied name into the caller's NAME_MAX-sized buffer with memcpy(name, rinfo->dname, rinfo->dname_len) and then writes name[rinfo->dname_len] = 0, without checking dname_len against NAME_MAX. A malicious or buggy MDS that returns a LOOKUPNAME reply with dname_len > NAME_MAX overflows the buffer. __get_snap_name() copies rde->name / rde->name_len the same unchecked way. Impact: a malicious or compromised Ceph MDS overflows the NAME_MAX name buffer in a client's NFS-export get_name path, a slab out-of-bounds write reported by KASAN. Reachable when a CephFS mount is re-exported over NFS. Add ceph_export_copy_name(), which rejects lengths above NAME_MAX with -ENAMETOOLONG before the copy, and use it in both ceph_get_name() and __get_snap_name(). 2026-10-16 CVE-2026-89652 openEuler-24.03-LTS-SP1 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock list_for_each_entry() iterates ci->i_cap_flush_list but drops i_ceph_lock to send cap messages. During the unlock window, handle_cap_flush_ack() can acquire i_ceph_lock, detach cf entries with tid <= flush_tid from the list, release i_ceph_lock, and free them via ceph_free_cap_flush() outside any lock. When the original thread reacquires i_ceph_lock and the for-loop macro advances via cf = list_next_entry(cf, i_list), it dereferences cf->i_list.next on freed memory. The race timeline: __kick_flushing_caps() handle_cap_flush_ack() ----------------------- ----------------------- holds i_ceph_lock <--- iterates to cf (tid=10) prepares FLUSH message drops i_ceph_lock <--- __send_cap() ── FLUSH(tid=10) MDS sends FLUSH_ACK(tid=10) ---> acquires i_ceph_lock cf->tid(10) <= flush_tid(10), detaches cf from i_cap_flush_list drops i_ceph_lock ceph_free_cap_flush(cf) <- frees it! acquires i_ceph_lock <--- for-loop advances: cf = list_next_entry(cf, i_list) -- UAF on freed cf->i_list.next The cf was just sent by __kick_flushing_caps itself via __send_cap(). The MDS may respond with FLUSH_ACK quickly enough that handle_cap_flush_ack() frees cf before __kick_flushing_caps can finish the iteration. Fix by converting to a manual while loop: save the next pointer under i_ceph_lock before dropping it, then use the saved pointer after reacquiring, so the potentially-freed cf is never accessed again. 2026-10-16 CVE-2026-89655 openEuler-24.03-LTS-SP1 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358 In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash passing ERR_PTR to kthread_stop() event_test_stuff() calls kthread_run() and unconditionally passes the returned task_struct pointer to kthread_stop(). kthread_run() returns an error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for example under memory pressure during the boot-time event self-test. kthread_stop() then dereferences the invalid pointer, crashing the kernel. Check the result of kthread_run() before passing it to kthread_stop(). Use WARN_ON() so that a failure to create the self-test thread does not go unnoticed, matching the ring-buffer self-test fix in commit 91542863abad ("ring-buffer: Fix crash passing ERR_PTR to kthread_stop()"). 2026-10-16 CVE-2026-89749 openEuler-24.03-LTS-SP1 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2026-10-16 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-4358